The plate casting machine sprays anti-stick coating on the casting mold

In the foundry industry, it is often necessary to spray anti-stick coatings or thermal insulation coatings on casting molds. At present, manual spraying is mainly used. However, due to the complexity of many sand molds and multiple spraying layers, there are many uncertain factors in manual spraying. Uneven thickness of the coating and incomplete coverage often occur. After pouring, the casting is likely to be scrapped or defective, and subsequent processing will increase labor costs again. The existing mechanical spraying device moves back and forth along the motion track, and the flexibility of operation Low, poor positioning accuracy, the nozzle position generally can only move left and right, only used for a certain device, the position of the sprayed part is fixed, it is easy to produce spraying dead spots, and a separate uniform coating device is required, which greatly increases additional costs.

Contact information

Quanzhou Dongshan Machinery Co., Ltd. (Quanzhou Chaohong Branch)

Tel: 15906073278 Miss Rao/15906073528 Mr. Peng

Email: 517348327@qq.com

Official website: www.kpsaccme.com

Address: 1st Floor, Building 2, No. 286, Jitai Road, Quanzhou Economic and Technological Development Zone, Fujian Province